888-628-5030
Contact Us
   
Home >> END MILLING >> CHAMFER
   
Results
You searched for: CHAMFER
Results Displayed: 1 - 30 of 30
Page Size:   
Item IDDescriptionUOMQuantity
HFM0125N03CR3
140800009
/contentonly.aspx?file=images/items/HFM0125N03CR3_t.* does not exist		End-Mill (Solid Carbide High-Feed Rate); CutAngle:85-Deg; CutDia:.125"; CutterL:.375"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; Matl:CARBIDE; 4 Flute; OAL:1.5"; PreChmfLen:.3875"; Rad:.0160"; Rad:.016"; ShankD:.125"; Inch
HFM0125N03CR7
NO EDP - HFM0125N03CR7
/contentonly.aspx?file=images/items/HFM0125N03CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.125"; CutterLen:0.375"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:1.5"; Rad:0.016"; ShankDia:0.125"; Inch
HFM0188N06CR3
140800010
/contentonly.aspx?file=images/items/HFM0188N06CR3_t.* does not exist		End-Mill (Solid Carbide High-Feed Rate); CutAngle:85-Deg; CutDia:.1875"; CutterL:.625"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; Matl:CARBIDE; 4 Flute; OAL:2"; PreChmfLen:.625"; Rad:.0310"; Rad:.031"; ShankD:.1875"; Inch
HFM0188N06CR7
NO EDP - HFM0188N06CR7
/contentonly.aspx?file=images/items/HFM0188N06CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.1875"; CutterLen:0.625"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:2"; Rad:0.031"; ShankDia:0.1875"; Inch
HFM0250N08CR3
140800011
/contentonly.aspx?file=images/items/HFM0250N08CR3_t.* does not exist		End-Mill (Solid Carbide High-Feed Rate); CutAngle:85-Deg; CutDia:.25"; CutterL:.875"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; May Rq Sp Hold; Matl:CARBIDE; 4 Flute; OAL:2.5"; Rad:.0350"; Rad:.035"; ShankD:.25"; Inch
HFM0250N08CR7
NO EDP - HFM0250N08CR7
/contentonly.aspx?file=images/items/HFM0250N08CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.25"; CutterLen:0.875"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:2.5"; Rad:0.035"; ShankDia:0.25"; Inch
HFM0313N12CR3
140800012
/contentonly.aspx?file=images/items/HFM0313N12CR3_t.* does not exist		End-Milling (Solid Carbide High-Feed Rate); Coolant:None; CutAngle:85-Deg; CutDia:.3125"; CutterLen:1.25"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; Matl:CARBIDE; 4 Flutes; OAL:3"; Rad:.0510"; Rad:.051"; ShankDia:.3125"; Inch
HFM0313N12CR7
NO EDP - HFM0313N12CR7
/contentonly.aspx?file=images/items/HFM0313N12CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.3125"; CutterLen:1.25"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:3"; Rad:0.051"; ShankDia:0.3125"; Inch
HFM0375N12CR3
140800013
/contentonly.aspx?file=images/items/HFM0375N12CR3_t.* does not exist		End-Milling (Solid Carbide High-Feed Rate); Coolant:None; CutAngle:85-Deg; CutDia:.375"; CutterLen:1.25"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; Matl:CARBIDE; 4 Flutes; OAL:3.5"; Rad:.0670"; Rad:.067"; ShankDia:.375"; Inch
HFM0375N12CR7
NO EDP - HFM0375N12CR7
/contentonly.aspx?file=images/items/HFM0375N12CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.375"; CutterLen:1.25"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:3.5"; Rad:0.067"; ShankDia:0.375"; Inch
HFM0500N15CR3
140800014
End-Mill (Solid Carbide High-Feed Rate); CutAngle:85-Deg; CutDia:.5"; CutterL:1.5"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; May Rq Sp Hold; Matl:CARBIDE; 4 Flute; OAL:4"; Rad:.0830"; Rad:.083"; ShankD:.5"; Inch
HFM0500N15CR7
NO EDP - HFM0500N15CR7
Coolant:None; CutAngle:85-Deg; CutDia:0.5"; CutterLen:1.5"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:4"; Rad:0.083"; ShankDia:0.5"; Inch
HFM0603N09CR3
140800002
/contentonly.aspx?file=images/items/HFM0603N09CR3_t.* does not exist		CutAngle:5-Deg; CutDia:3mm; CutterLen:9mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.4mm; ShankDia:6.00mm; Metric
HFM0603N09CR7
NO EDP - HFM0603N09CR7
/contentonly.aspx?file=images/items/HFM0603N09CR7_t.* does not exist		CutAngle:5-Deg; CutDia:3mm; CutterLen:9mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.4mm; ShankDia:6.00mm; Metric
HFM0604N10CR3
140800003
/contentonly.aspx?file=images/items/HFM0604N10CR3_t.* does not exist		CutAngle:5-Deg; CutDia:4mm; CutterLen:10mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.5mm; ShankDia:6.00mm; Metric
HFM0604N10CR7
NO EDP - HFM0604N10CR7
/contentonly.aspx?file=images/items/HFM0604N10CR7_t.* does not exist		CutAngle:5-Deg; CutDia:4mm; CutterLen:10mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.5mm; ShankDia:6.00mm; Metric
HFM0605N15CR3
140800004
/contentonly.aspx?file=images/items/HFM0605N15CR3_t.* does not exist		CutAngle:5-Deg; CutDia:5mm; CutterLen:15mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.8mm; ShankDia:6.00mm; Metric
HFM0605N15CR7
NO EDP - HFM0605N15CR7
/contentonly.aspx?file=images/items/HFM0605N15CR7_t.* does not exist		CutAngle:5-Deg; CutDia:5mm; CutterLen:15mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.8mm; ShankDia:6.00mm; Metric
HFM0606N20CR3
140800005
/contentonly.aspx?file=images/items/HFM0606N20CR3_t.* does not exist		CutAngle:5-Deg; CutDia:6mm; CutterLen:20mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.9mm; ShankDia:6.00mm; Metric
HFM0606N20CR7
NO EDP - HFM0606N20CR7
/contentonly.aspx?file=images/items/HFM0606N20CR7_t.* does not exist		CutAngle:5-Deg; CutDia:6mm; CutterLen:20mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:57mm; Rad:0.9mm; ShankDia:6.00mm; Metric
HFM0625N16CR3
140800015
/contentonly.aspx?file=images/items/HFM0625N16CR3_t.* does not exist		End-Mill (Solid Carbide High-Feed); CutAngle:85-Deg; CutDia:.625"; CutterL:1.42"; Std; Edge:CHMF; Ext/Int-RH/LH; FaceRamp:5Deg; Grade:CR3; Helix:Deg; May Rq Sp Hold; 4 Flute; OAL:4.5"; PreChmfLen:1.625"; Rad:.1060"; Rad:.106"; ShankD:.625"; Inch
HFM0625N16CR7
NO EDP - HFM0625N16CR7
/contentonly.aspx?file=images/items/HFM0625N16CR7_t.* does not exist		Coolant:None; CutAngle:85-Deg; CutDia:0.625"; CutterLen:1.42"; Design:Std; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:4.5"; Rad:0.106"; ShankDia:0.625"; Inch
HFM0808N26CR3
140800006
/contentonly.aspx?file=images/items/HFM0808N26CR3_t.* does not exist		CutAngle:5-Deg; CutDia:8mm; CutterLen:26mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:63mm; Rad:1.3mm; ShankDia:8.00mm; Metric
HFM0808N26CR7
NO EDP - HFM0808N26CR7
/contentonly.aspx?file=images/items/HFM0808N26CR7_t.* does not exist		CutAngle:5-Deg; CutDia:8mm; CutterLen:26mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:63mm; Rad:1.3mm; ShankDia:8.00mm; Metric
HFM1010N30CR3
140800007
/contentonly.aspx?file=images/items/HFM1010N30CR3_t.* does not exist		CutAngle:5-Deg; CutDia:10mm; CutterLen:30mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:72mm; Rad:1.7mm; ShankDia:10.00mm; Metric
HFM1010N30CR7
NO EDP - HFM1010N30CR7
/contentonly.aspx?file=images/items/HFM1010N30CR7_t.* does not exist		CutAngle:5-Deg; CutDia:10mm; CutterLen:30mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:72mm; Rad:1.7mm; ShankDia:10.00mm; Metric
HFM1212N34CR3
140800001
/contentonly.aspx?file=images/items/HFM1212N34CR3_t.* does not exist		CutAngle:5-Deg; CutDia:12mm; CutterLen:34mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:83mm; Rad:2.1mm; ShankDia:12.00mm; Metric
HFM1212N34CR7
NO EDP - HFM1212N34CR7
/contentonly.aspx?file=images/items/HFM1212N34CR7_t.* does not exist		CutAngle:5-Deg; CutDia:12mm; CutterLen:34mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:83mm; Rad:2.1mm; ShankDia:12.00mm; Metric
HFM1616N42CR3
140800008
/contentonly.aspx?file=images/items/HFM1616N42CR3_t.* does not exist		CutAngle:5-Deg; CutDia:16mm; CutterLen:42mm; Design:Hi-Feed; Edge:CHMF; Grade:CR3; Helix:000.00-Deg; 4 Flutes; OAL:110mm; Rad:2.7mm; ShankDia:16.00mm; Metric
HFM1616N42CR7
NO EDP - HFM1616N42CR7
/contentonly.aspx?file=images/items/HFM1616N42CR7_t.* does not exist		CutAngle:5-Deg; CutDia:16mm; CutterLen:42mm; Design:Hi-Feed; Edge:CHMF; Grade:CR7; Helix:000.00-Deg; 4 Flutes; OAL:110mm; Rad:2.7mm; ShankDia:16.00mm; Metric
 
Page Size:   
   
footer image

2033 Innovation Way
Hartford WI 53027
Toll-Free: 888.628.5030
Phone: 262.628.5030
Fax: 262.628.5302

Youtube LinkedIN   Carmex Precision Tools LLC. © All Rights Reserved.